Finally, we put the body back on the frame! This was a major milestone considering where this car came from. The first step was to trick some friends and my dad into coming over to help! We lowered the body down to some jack stands so that we could detach it from the rotisserie. Then we pulled the center bar from the rotisserie and removed the casters so that the stands would lay flat on the concrete and not move. Grabbing the rocker panels from the side (with a 2×4 for weight distribution and protection), we were able to raise the body up as high as we needed in order to roll the frame right under it. After that, we simply jacked the frame up to meet the body, installed some bolts and let the whole thing back down.
